Richland, WA
Concrete Contractor in Richland, WA
Richland has some of the Tri-Cities' most established neighborhoods, from mid-century homes near downtown to newer subdivisions toward the Yakima River valley, and we pour concrete for both ends of that range.
Many of the original Hanford-era homes near downtown Richland, known locally as alphabet houses, sit on driveways and walkways that are more than 70 years old and were poured with little to no gravel base by today's standards. Those are usually full tear-out and repour jobs. Newer neighborhoods like Meadow Springs and Horn Rapids toward the edge of town tend to need extensions and new patios instead, the existing concrete out there is still structurally sound.
Bucks Concrete pours in Richland regularly, and we check the base under an existing slab before we ever write an estimate, since a repour on a bad base just cracks again in a few winters. We coordinate with the city on driveway approach permits for replacement work, so a project doesn't stall waiting on paperwork.
What Building in Richland Is Like
- Alphabet housesMany original Hanford-era homes near downtown sit on driveways and walkways 70+ years old and due for replacement.
- South Richland growthMeadow Springs and Horn Rapids usually need extensions or new patios rather than full tear-outs.
- Minimal original baseMany older Richland slabs were poured with little to no gravel base by today's standards, we check for it before quoting.
- City permittingWe coordinate with the city on driveway approach permits for replacement work.
Recent Richland Job
A Richland driveway near downtown had settled unevenly over the original alphabet-house slab. We tore it out, added a proper compacted base, and repoured it level with the garage.
Popular Project Types in Richland
A few of the projects we take on most often for Richland clients. Everything on our full project list is available too.
Driveways
New driveway pours, full replacements, and extensions, set on a properly compacted base so it holds up through Tri-Cities freeze-thaw cycles.
- Full tear-out and repour of failed driveways
- New pours for new construction
- Broom, stamped, or exposed aggregate finish
- Sized for standard vehicles, RVs, or light commercial loads
Concrete Removal & Replacement
Tear-out of cracked, heaved, or failed slabs and a clean repour on a proper base, done right the first time.
- Demo and haul-away of failed concrete
- Base inspection and rebuild before repour
- Matched to surrounding grade and finish
- Applies to driveways, patios, and slabs
Patios & Walkways
Broom finish, stamped, and exposed aggregate patios and walkways, finished to handle foot traffic and outdoor furniture for years.
- Backyard and side-yard patios
- Walkways connecting driveways to entries
- Broom, stamped, or exposed aggregate finish
- Built to tie into existing landscaping and grade
Sidewalks & Curbing
Residential and light commercial sidewalks and curbing, formed and poured to meet city and county specifications.
- Residential and light commercial sidewalks
- Curb and gutter sections
- Formed and poured to city/county spec
- ADA-compliant ramps where required
FAQ
Common Questions
How soon can I drive or walk on new concrete?
You can typically walk on new concrete after about 24 to 48 hours, but we ask that vehicles stay off it for at least 7 days. Concrete keeps gaining strength for about 28 days, so we'll confirm the safe date for anything heavier, like an RV or a loaded trailer.
Is cracking normal, or does it mean something went wrong?
Concrete shrinks slightly as it cures, and some cracking is normal, not a defect. We cut control joints at regular intervals so that shrinkage happens along those joints instead of showing up as a random crack across the slab.
Do you pour concrete in the winter?
We watch the forecast closely and won't pour into ground that's still frozen or when temperatures are dropping toward freezing during the cure window. In the Tri-Cities, that usually means shifting outdoor pours away from the coldest stretches of December through February, or using cold-weather mix and insulating blankets when a job can't wait.
What's the price difference between stamped and broom-finish concrete?
Stamped and decorative concrete costs more than a plain broom finish because of the extra labor for coloring, stamping patterns, and sealing. We'll walk you through both options and what each runs for your specific project during the estimate.
How long does a typical concrete job take?
A standard driveway or patio pour usually takes a few days from prep through finishing, plus cure time before it's ready for full use. Larger slabs or jobs with more site prep take longer, we'll give you a specific timeline as part of your written estimate.
Also Serving Nearby
Richland Clients Trust Bucks Concrete LLC
Get a free, no-obligation quote, we typically respond within a business day.